Skip to main content

What if there is no water when the mud pump is turning?

 First of all, it is necessary to analyze the reasons for the lack of water when it rotates, and then carry out effective maintenance.

First, for the mud pump installation position is too high, suction pipe leakage or insufficient filling of drinking water and other reasons leading to the pump does not suck water, you can continue to fill the mud pump priming; check whether the pipeline is normal, if there is an air leakage to be dealt with in a timely manner; for the front liner and the impeller gap between the reasonable adjustments; adjustment of the installation height of the mud pump will be lowered to the pump within the suction range, to discharge the air that is retained in it.


Second, for the inlet pipeline is blocked leading to the problem, it is necessary to clean up the filter mesh, remove debris in a timely manner, and then check again whether the bottom valve can be switched on and off smoothly, all normal after the mud pump can be used normally, this time, the rig is relieved of the fault, you can enter the work state.


Third, for the direction of rotation of the mud pump, whether it has been in the process of use, or after maintenance or repair, the operator needs to check the direction of rotation, to maintain consistency with the logo, so as to avoid the mud pump to rotate when no water failure.


Fourth, for the mud pump rotation speed is low, you need to check the value of the tachometer, so that the speed of the pump meets the rated standard, so that it can rotate normally.


In addition, no water failure is sometimes due to the slow speed of water, in the early stage is easy to give people the illusion of no water, this time you need to improve the water speed of the mud pump.

water well drilling rig

The main repair methods include adjusting the outlet pipe, etc., to solve the problem quickly and effectively.

If you need help choosing the right mud pump, click on the link below and contact our professional team directly.
Contact us

Comments

Post a Comment

Popular posts from this blog

How much does it cost to buy a slurry pump

  The price of slurry pumps can be affected by a variety of factors, so it is difficult to give an exact figure. Generally speaking, the price of slurry pumps will vary according to the following factors: Factors affecting the price of slurry pumps Pump type and specifications: flow, head, caliber, material and other parameters are different, the price will also have a big difference. Pump material: slurry pump contact medium corrosive different, the material selected is different, thus affecting the price. Common materials are cast iron, stainless steel, wear-resistant alloy. Pump brand: different brands of pumps, its technical level, quality, after-sales service and so on there are differences, the price will naturally be different. Pump configuration: pump configuration, such as motor, control system, seals, etc., will also affect the price. Purchase Quantity: Bulk purchases are usually discounted to a certain extent. Market conditions: Fluctuations in the price of raw materials...
Post a Comment
Read more

How to replace the impeller of a slurry pump

  The impeller of the slurry pump is a wearing part, which needs to be inspected and replaced periodically. The process of replacing the impeller is relatively complex and requires certain specialized knowledge and skills. The following are the steps for replacing the impeller of the slurry pump: 1. Preparation Shut down and disconnect the power:  Before any operation, be sure to cut off the power supply to ensure safety. Preparation tools:  ready wrenches, screwdrivers, gaskets, new impeller and so on. Drain:  Empty the pump. Protective measures:  Wear protective gloves, safety glasses and other protective equipment. 2. Disassembly Procedure DISASSEMBLY:  Disassemble the suction and discharge pipes connected to the pump. Remove pump cover:  Loosen the bolts securing the pump cover and carefully remove the cover. Remove the impeller:  Loosen the nuts secure the impeller with a suitable tool and remove the impeller. 3. Install the new impeller Insp...
Post a Comment
Read more

Profile Of Guangzhou International Technology Co., Ltd

  Guangzhou International Technology Co., Ltd.  is a product group company mainly engaged in industrial equipment and accessories. Pearldrill is one of our subsidiary companies that produces and sells drilling equipment and tools. The drilling products of our company include the following categories: 1. Water well  drilling rig s 2. PDC Drilling Bits 3. Slurry  pumps  and  mud pump s 4. Drilling Accessories including drilling pipe etc. Our Service Pearldrill of Guangzhou International drilling series products has won the favor of customers at home and abroad, especially African customers, with their excellent quality, preferential prices, and considerate services. The products have been widely used in mining,  water well drilling , and anchor injection projects., slope protection engineering, oil and gas engineering, underwater rock drilling and blasting operations in seaports and waterways, hydropower engineering, national defense engineering, and oth...
Post a Comment
Read more