Skip to main content

What's the difference between drill bit and drill rig lubricants

 Drill lubricant (or cutting fluid, coolant)

Main function:
Cooling: The drill bit generates a lot of heat during high-speed rotation and cutting, and the main function of the lubricating fluid is to take away this heat and prevent the drill bit from overheating and wearing out or even being damaged.
Lubrication: Reduce the friction between the drill and the workpiece, reduce the cutting force, and improve the machining precision and surface finish.
Chip removal: Remove the chips generated during the cutting process to prevent clogging and secondary cutting.
Anti-corrosion: Protect the workpiece and drill bit from rusting.
Type:
Water-based cutting fluid: water as the main ingredient, add lubricants, rust inhibitors and other additives, cooling effect is good, the cost is low, but the lubricity and rust resistance is relatively poor.
Oil-based cutting fluid: mineral oil or synthetic oil as the main component, good lubrication and rust resistance, but the cooling effect is relatively poor, high cost.
Usage Scenario: Mainly used in metal cutting processing, such as drilling, turning, milling and so on.


Drilling machine lubricating fluid (or lubricating oil, grease)
Main function:
Lubrication: Reduce the friction between the internal moving parts of the drilling rig (such as bearings, gears, hydraulic system, etc.), reduce wear and prolong the life of the equipment.
Sealing: Prevent dust, water and other impurities from entering the moving parts, keep them clean.
Cooling: Carry away some of the heat generated by friction.
Anti-corrosion: Protects metal parts from rusting.
Type:
Lubricating oil: better fluidity, suitable for high-speed moving parts, such as engines, gearboxes and so on.
Grease: Higher consistency, suitable for low-speed movement or parts that are not easy to fill with lubricant, such as bearings, slide rails, etc.
Usage Scenario: Used in all kinds of mechanical equipment, including drilling rigs, engines, gearboxes, hydraulic systems, and so on.
water well drilling rig

If you need to buy lubricant for water well drilling rig or drill, click the link below to contact our professional team.

Contact us

Comments

Post a Comment

Popular posts from this blog

How much does it cost to buy a slurry pump

  The price of slurry pumps can be affected by a variety of factors, so it is difficult to give an exact figure. Generally speaking, the price of slurry pumps will vary according to the following factors: Factors affecting the price of slurry pumps Pump type and specifications: flow, head, caliber, material and other parameters are different, the price will also have a big difference. Pump material: slurry pump contact medium corrosive different, the material selected is different, thus affecting the price. Common materials are cast iron, stainless steel, wear-resistant alloy. Pump brand: different brands of pumps, its technical level, quality, after-sales service and so on there are differences, the price will naturally be different. Pump configuration: pump configuration, such as motor, control system, seals, etc., will also affect the price. Purchase Quantity: Bulk purchases are usually discounted to a certain extent. Market conditions: Fluctuations in the price of raw materials...
Post a Comment
Read more

How to replace the impeller of a slurry pump

  The impeller of the slurry pump is a wearing part, which needs to be inspected and replaced periodically. The process of replacing the impeller is relatively complex and requires certain specialized knowledge and skills. The following are the steps for replacing the impeller of the slurry pump: 1. Preparation Shut down and disconnect the power:  Before any operation, be sure to cut off the power supply to ensure safety. Preparation tools:  ready wrenches, screwdrivers, gaskets, new impeller and so on. Drain:  Empty the pump. Protective measures:  Wear protective gloves, safety glasses and other protective equipment. 2. Disassembly Procedure DISASSEMBLY:  Disassemble the suction and discharge pipes connected to the pump. Remove pump cover:  Loosen the bolts securing the pump cover and carefully remove the cover. Remove the impeller:  Loosen the nuts secure the impeller with a suitable tool and remove the impeller. 3. Install the new impeller Insp...
Post a Comment
Read more

Profile Of Guangzhou International Technology Co., Ltd

  Guangzhou International Technology Co., Ltd.  is a product group company mainly engaged in industrial equipment and accessories. Pearldrill is one of our subsidiary companies that produces and sells drilling equipment and tools. The drilling products of our company include the following categories: 1. Water well  drilling rig s 2. PDC Drilling Bits 3. Slurry  pumps  and  mud pump s 4. Drilling Accessories including drilling pipe etc. Our Service Pearldrill of Guangzhou International drilling series products has won the favor of customers at home and abroad, especially African customers, with their excellent quality, preferential prices, and considerate services. The products have been widely used in mining,  water well drilling , and anchor injection projects., slope protection engineering, oil and gas engineering, underwater rock drilling and blasting operations in seaports and waterways, hydropower engineering, national defense engineering, and oth...
Post a Comment
Read more