how to use the slurry pumps

The use of slurry pumps

Check before starting:

Check whether the pump body, pipeline, lubricant and power source are normal.

Fill water and exhaust (such as non-self-priming pumps).

Starting steps:

Turn on the cooling water first, slowly open the outlet valve after starting the motor.

Adjust the valve to ensure normal flow and pressure.

Attention during operation:

Monitor the vibration, noise, pressure, flow rate and bearing temperature of the pump (≤70°C).

Avoid large particles or excessively thick slurry from entering the pump body.

Shutdown operation:

Close the outlet valve first, then stop the motor, clean the pump body, and empty the slurry.

Stop the cooling water and disconnect the power.

Regular maintenance:

Clean the pump body, check the impeller, seals, bearings, and other worn parts, and replace the lubricating oil regularly.

Note: Avoid dry spinning and overload operation, make sure the slurry is within the pump design range.

If you don't know how to choose the right water well drilling rig, click the link below to contact our professional team directly.

Contact us

Comments

What are the differences bewteen core drilling bits and pdc drilling bits

Although both core drills and PDC drills are tools used for drilling and sampling, there are significant differences between them in terms of material, structure, and scope of application. Core Drill Definition: A core drill is a broad concept that refers to all drills used for coring operations. It can be a variety of types such as tungsten carbide bits, PDC bits, diamond bits and so on. Function: Mainly used to remove a cylindrical section of core sample from different types of materials for subsequent analysis and research. Material: Various materials, including carbide, diamond, PDC, etc. Different materials are selected according to the hardness and toughness of the drilling material. Structure: Relatively simple structure, mainly consists of drill body, inner cylinder and outer cylinder. Application: Wide range of applications, including geological exploration, engineering survey, mineral exploration, etc. PDC Drill Bit Definition: PDC drill bit is a special coring dr...

Does the water well drilling bit have a warranty

Whether or not a water well drill bit has a warranty, and the length of that warranty, depends on several factors: Drill Bit Type: Different types of drill bits vary greatly in their structure, material and manufacturing process, and therefore warranty policies will vary. For example, PDC bits (polycrystalline diamond composite bits) usually have a longer warranty due to their higher technology, whereas some simple tooth wheel bits or diamond bits may not have a defined warranty or may have a shorter warranty. Manufacturer/Supplier: After-sales service policies and reputations vary between manufacturers or suppliers. Some large, reputable manufacturers usually offer a good warranty, while some small, unknown suppliers may not offer a warranty or may have harsh warranty terms. Purchase Contracts/Agreements: When purchasing a drill bit, it is important to read the terms of the purchase contract or agreement carefully, especially the sections on warranty and after-...

How to replace the impeller of a slurry pump

The impeller of the slurry pump is a wearing part, which needs to be inspected and replaced periodically. The process of replacing the impeller is relatively complex and requires certain specialized knowledge and skills. The following are the steps for replacing the impeller of the slurry pump: 1. Preparation Shut down and disconnect the power: Before any operation, be sure to cut off the power supply to ensure safety. Preparation tools: ready wrenches, screwdrivers, gaskets, new impeller and so on. Drain: Empty the pump. Protective measures: Wear protective gloves, safety glasses and other protective equipment. 2. Disassembly Procedure DISASSEMBLY: Disassemble the suction and discharge pipes connected to the pump. Remove pump cover: Loosen the bolts securing the pump cover and carefully remove the cover. Remove the impeller: Loosen the nuts secure the impeller with a suitable tool and remove the impeller. 3. Install the new impeller Insp...

Pearldrill PDC Bits and Pumps

Search This Blog