Skip to main content

What is the difference between a mud pump and a slurry pump

 The main differences between mud pumps and mortar pumps are as follows:


1, The slurry pump is a cantilevered single-stage single-suction centrifugal pump, designed and developed for conveying corrosive media containing fine particles. the pump is made of steel lined with ultra-high molecular weight polyethylene (UHMW-PE), which is the latest generation of corrosion and abrasion-resistant engineering plastics for pumps, and the most prominent advantage is that it has the most excellent abrasion and impact resistance among all plastics (especially low-temperature impact resistance), Creep resistance, (environmental stress cracking) and excellent corrosion resistance.

Slurry pump is a kind of pump that can adapt to different working conditions, such as conveying acid, alkaline clear liquid or slurry; all kinds of corrosive slurry and dilute acid and so on. The pump is both corrosion-resistant and abrasion-resistant, with a wide range of uses.


2, Mud pump is also a broad concept of a common pump, different regions, habits, and ultimately involved in the pump type will not be the same, this article that elaborates on the mud pump is most of the sense of a pump type: oil drilling in the field of the application of the mud pump. In fact, sewage pumps, slurry pumps and other non-clean water pumps and mud pumps in the name of the common time. This article describes to the reader the mud pumps in the field of drilling.

In the commonly used positive circulation drilling, it is the surface flushing medium - water, mud or polymer flushing fluid under a certain pressure, through the high-pressure hose, faucet and the center hole of the drill pipe column straight to the bottom of the drill bit, in order to achieve the cooling of the drill bit, the cutting down of the rock debris to remove and transport to the surface of the purpose.

Commonly used mud pumps are piston or plunger type, driven by the power engine pump crankshaft slewing, crankshaft through the crosshead and then drive the piston or plunger in the pump cylinder to do reciprocating motion. Under the alternate action of suction and discharge valves, the purpose of pressurizing and circulating the flushing liquid is realized.


12/10G-G疏浚用砂砾泵


Comments

Post a Comment

Popular posts from this blog

How much does it cost to buy a slurry pump

  The price of slurry pumps can be affected by a variety of factors, so it is difficult to give an exact figure. Generally speaking, the price of slurry pumps will vary according to the following factors: Factors affecting the price of slurry pumps Pump type and specifications: flow, head, caliber, material and other parameters are different, the price will also have a big difference. Pump material: slurry pump contact medium corrosive different, the material selected is different, thus affecting the price. Common materials are cast iron, stainless steel, wear-resistant alloy. Pump brand: different brands of pumps, its technical level, quality, after-sales service and so on there are differences, the price will naturally be different. Pump configuration: pump configuration, such as motor, control system, seals, etc., will also affect the price. Purchase Quantity: Bulk purchases are usually discounted to a certain extent. Market conditions: Fluctuations in the price of raw materials...
Post a Comment
Read more

How to replace the impeller of a slurry pump

  The impeller of the slurry pump is a wearing part, which needs to be inspected and replaced periodically. The process of replacing the impeller is relatively complex and requires certain specialized knowledge and skills. The following are the steps for replacing the impeller of the slurry pump: 1. Preparation Shut down and disconnect the power:  Before any operation, be sure to cut off the power supply to ensure safety. Preparation tools:  ready wrenches, screwdrivers, gaskets, new impeller and so on. Drain:  Empty the pump. Protective measures:  Wear protective gloves, safety glasses and other protective equipment. 2. Disassembly Procedure DISASSEMBLY:  Disassemble the suction and discharge pipes connected to the pump. Remove pump cover:  Loosen the bolts securing the pump cover and carefully remove the cover. Remove the impeller:  Loosen the nuts secure the impeller with a suitable tool and remove the impeller. 3. Install the new impeller Insp...
Post a Comment
Read more

Profile Of Guangzhou International Technology Co., Ltd

  Guangzhou International Technology Co., Ltd.  is a product group company mainly engaged in industrial equipment and accessories. Pearldrill is one of our subsidiary companies that produces and sells drilling equipment and tools. The drilling products of our company include the following categories: 1. Water well  drilling rig s 2. PDC Drilling Bits 3. Slurry  pumps  and  mud pump s 4. Drilling Accessories including drilling pipe etc. Our Service Pearldrill of Guangzhou International drilling series products has won the favor of customers at home and abroad, especially African customers, with their excellent quality, preferential prices, and considerate services. The products have been widely used in mining,  water well drilling , and anchor injection projects., slope protection engineering, oil and gas engineering, underwater rock drilling and blasting operations in seaports and waterways, hydropower engineering, national defense engineering, and oth...
Post a Comment
Read more