Skip to main content

How to adjust the pressure of the pump

 The water pump is the power equipment of the fluid transportation and distribution system. The adjustment of the water pump pressure is very important for the operation. There are a few adaptations of the fluid transportation and distribution system:

1. Add a frequency converter to adjust pump pressure:

After the frequency converter is installed, the pressure is fed back to the frequency converter in real-time by using the pressure sensor installed in the water pump pipeline. After the frequency converter is reset to the required parameters, the electronic speed regulation function of the frequency converter is utilized, by changing the frequency of the motor to control the pump speed (pump water pressure and its speed are proportional), and then to achieve the regulation of pump pressure.


2. Set Pump Inlet and outlet control valves to adjust pump pressure:

Increase Pump Inlet valve opening, system resistance increase, increase pressure, reduce pump inlet valve opening, system resistance to reduce pressure; Or from the outlet of the pump to add balance pipe regulating valve to the entrance of the pump, by adjusting the opening of the valve can be adjusted pump pressure


3. Change pump impeller diameter to achieve pump pressure regulation:

Usually the impeller diameter of the pump, the pump will directly affect the flow and outlet pressure. In the project, some projects through the replacement of different impeller diameter pumps, change the pump performance parameters, and then achieve the goal of regulating pump pressure.

In addition to changing the diameter of the pump, it is also possible to adjust the speed of the pump.

If the pump is driven by a motor, it can be equipped with variable-frequency motor to adjust the speed of the motor to adjust the flow and pressure parameters of the pump in operation to meet the requirements of different parameters. This method of regulating speed has the advantage that the motor will not overheat in the process of regulation, but the disadvantage is that the range of regulation is limited.


4. throttling adjustment:

In order to adjust the flow and pressure of the pump, the regulating valve with different flow characteristics is installed in the outlet pipe of the pump. This method is widely used, the electric control valve and pneumatic control valve can also be selected by the control system according to the working conditions of the requirements of automatic control. However, it should be noted that if the parameters to be adjusted are too small, that is, the regulator valve needs to be closed to a very small position, which may cause the pump motor to overcurrent, in this case, bypass should be set to shunt, ensure the normal operation of working conditions.


Comments

Post a Comment

Popular posts from this blog

How much does it cost to buy a slurry pump

  The price of slurry pumps can be affected by a variety of factors, so it is difficult to give an exact figure. Generally speaking, the price of slurry pumps will vary according to the following factors: Factors affecting the price of slurry pumps Pump type and specifications: flow, head, caliber, material and other parameters are different, the price will also have a big difference. Pump material: slurry pump contact medium corrosive different, the material selected is different, thus affecting the price. Common materials are cast iron, stainless steel, wear-resistant alloy. Pump brand: different brands of pumps, its technical level, quality, after-sales service and so on there are differences, the price will naturally be different. Pump configuration: pump configuration, such as motor, control system, seals, etc., will also affect the price. Purchase Quantity: Bulk purchases are usually discounted to a certain extent. Market conditions: Fluctuations in the price of raw materials...
Post a Comment
Read more

How to replace the impeller of a slurry pump

  The impeller of the slurry pump is a wearing part, which needs to be inspected and replaced periodically. The process of replacing the impeller is relatively complex and requires certain specialized knowledge and skills. The following are the steps for replacing the impeller of the slurry pump: 1. Preparation Shut down and disconnect the power:  Before any operation, be sure to cut off the power supply to ensure safety. Preparation tools:  ready wrenches, screwdrivers, gaskets, new impeller and so on. Drain:  Empty the pump. Protective measures:  Wear protective gloves, safety glasses and other protective equipment. 2. Disassembly Procedure DISASSEMBLY:  Disassemble the suction and discharge pipes connected to the pump. Remove pump cover:  Loosen the bolts securing the pump cover and carefully remove the cover. Remove the impeller:  Loosen the nuts secure the impeller with a suitable tool and remove the impeller. 3. Install the new impeller Insp...
Post a Comment
Read more

Profile Of Guangzhou International Technology Co., Ltd

  Guangzhou International Technology Co., Ltd.  is a product group company mainly engaged in industrial equipment and accessories. Pearldrill is one of our subsidiary companies that produces and sells drilling equipment and tools. The drilling products of our company include the following categories: 1. Water well  drilling rig s 2. PDC Drilling Bits 3. Slurry  pumps  and  mud pump s 4. Drilling Accessories including drilling pipe etc. Our Service Pearldrill of Guangzhou International drilling series products has won the favor of customers at home and abroad, especially African customers, with their excellent quality, preferential prices, and considerate services. The products have been widely used in mining,  water well drilling , and anchor injection projects., slope protection engineering, oil and gas engineering, underwater rock drilling and blasting operations in seaports and waterways, hydropower engineering, national defense engineering, and oth...
Post a Comment
Read more